基站占用带宽（OBW）测试

占用带宽需要小于等于TS 38.104 [2], table 5.3.5-1 ，即可占用带宽应该小于等于载波配置带宽；

The occupied bandwidth for each carrier shall be less than the channel bandwidth as defined in TS 38.104 [2], table 5.3.5-1 for BS type 1-C and BS type 1-H. For contiguous CA, the occupied bandwidth shall be less than or equal to the aggregated BS channel bandwidth as defined in TS 38.104 [2], clause 5.3A.

测试配置

测试单载波，最大发射功率，NR-FR1-TM1.1
RF channels to be tested for single carrier: M; see clause 4.9.1.
using the corresponding test model NR-FR1-TM1.1 at manufacturer’s declared rated output power (Prated,c,AC, or Prated,c,TABC, D.21).

测试步骤：

协议原文写的比较好，直接看即可
特别注意：
RBW 应该设置小于等于30K
SPAN 和 Sweeppoint 请按照要求设置

测试方法

参考RS的手册；

测试组网

仪表设置

OBW 影响因素

OBW 与RRU中频上信号的信道数字滤波器（FIR等）有关，如果不正常，因该排查数字滤波器设置；